Save Up To 25% On Your Utility Bill!
That's right up to 25% on you utility bill with our Power Save Unit!
How Does the Power-Save Unit Work?
The Power-Save Unit reduces the amount of power drawn from the utility by storing (in its capacitors) otherwise lost electricity (watts) caused by the inductive motors in your home. (Some examples of inductive motors are Air Conditioning units, refrigerators, freezers, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans etc.)
The technology applied by the Power-Save Unit supplies that stored electricity back to your inductive loads, thus causing you to decrease your demand from the utility. If you decrease your demand from the utility, your meter slows down, and you use less electricity. Th e thought is, you’ve already paid for that electricity, why pay for it and waste it when you can pay for it, store it, and reuse it again. This whole process is called power factor optimization.
Does the Power-Save Unit work in any home?
Yes it does, as long as you have a circuit breaker panel with breakers and not the old screw in type fuses, the unit will work on any single-phase electric application for homes.
Do you have a 3-phase Power-Save Unit for businesses available yet?
Yes!
Will the Power-Save Unit affect any of my appliances and their normal use?
No, if anything, your motors will run about 10% cooler, which is good for a motor because heat is the enemy of a motor.
Is the Power-Save Unit tested and approved by independent labs?
Yes, the Power-Save Unit is UL listed and tested, and has also been tested by the Universi ty of Santa Clara California’s Electrical Engineering department, of which the results of that test are available upon request. Also, the technology is recognized by the U.S. Department of Energy.
How much can I expect to save per month by using the Power-Save Unit?
That depends on many factors. The size of your home, the amount of inductive motor load, and the amount you are paying per kilowatt-hour for electricity etc. However, generally speaking users of the product have seen up to 25% in reduced consumption, but the average savings is somewhere in the 15% to 20% range.
Why haven’t I heard of this product until now?
That’s easy, two words “cost effectiveness”. Up until recently, electric rates throughout America were cheap, costing us 2, 3 or 4 cents per kilowatt-hour. Now, electric rates are 8, 10, 12, 14, and 19 and in some cases New York City is 22 cents per Kwh, and Hawaii is 33.5 cents per Kwh. At the cheaper rates the Power-Save Unit didn't make s ense, but at the current rates, it makes all the sense in the world.
What About Power-Save Unit Surge Protection?
The Power-Save Unit also protects the entire home against power surges.
How Does the Power-Save Unit Work?
The Power-Save Unit reduces the amount of power drawn from the utility by storing (in its capacitors) otherwise lost electricity (watts) caused by the inductive motors in your home. (Some examples of inductive motors are Air Conditioning units, refrigerators, freezers, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans etc.)
The technology applied by the Power-Save Unit supplies that stored electricity back to your inductive loads, thus causing you to decrease your demand from the utility. If you decrease your demand from the utility, your meter slows down, and you use less electricity. Th e thought is, you’ve already paid for that electricity, why pay for it and waste it when you can pay for it, store it, and reuse it again. This whole process is called power factor optimization.
Does the Power-Save Unit work in any home?
Yes it does, as long as you have a circuit breaker panel with breakers and not the old screw in type fuses, the unit will work on any single-phase electric application for homes.
Do you have a 3-phase Power-Save Unit for businesses available yet?
Yes!
Will the Power-Save Unit affect any of my appliances and their normal use?
No, if anything, your motors will run about 10% cooler, which is good for a motor because heat is the enemy of a motor.
Is the Power-Save Unit tested and approved by independent labs?
Yes, the Power-Save Unit is UL listed and tested, and has also been tested by the Universi ty of Santa Clara California’s Electrical Engineering department, of which the results of that test are available upon request. Also, the technology is recognized by the U.S. Department of Energy.
How much can I expect to save per month by using the Power-Save Unit?
That depends on many factors. The size of your home, the amount of inductive motor load, and the amount you are paying per kilowatt-hour for electricity etc. However, generally speaking users of the product have seen up to 25% in reduced consumption, but the average savings is somewhere in the 15% to 20% range.
Why haven’t I heard of this product until now?
That’s easy, two words “cost effectiveness”. Up until recently, electric rates throughout America were cheap, costing us 2, 3 or 4 cents per kilowatt-hour. Now, electric rates are 8, 10, 12, 14, and 19 and in some cases New York City is 22 cents per Kwh, and Hawaii is 33.5 cents per Kwh. At the cheaper rates the Power-Save Unit didn't make s ense, but at the current rates, it makes all the sense in the world.
What About Power-Save Unit Surge Protection?
The Power-Save Unit also protects the entire home against power surges.
Scedule service today to have your very own Power Save Unit installed and start saving money!
